Support for expanded Tungsten T3 screen

[steviehero]

Isilo is already hands-down the best doc/web reader for the Palm. It's the only way I read content on my Tungsten T3.

If I could just use all the expanded screen real estate of my T3 to read documents, then I'd be beside myself with joy...

Thanks for a great product, folks.

[iSilo]

Support for the expanded screen of the Tungsten T3 is available in version 4.

Assuming you have version 4, for iSilo to be able to take advantage of the expanded screen of the Tungsten T3, you also need to install the T3 DIA (Dynamic Input Area) Compatibility prcs from Palm. You can download them by clicking here (http://www.iSilo.com/download/dl/T3_DIA_Compatibility_prcs.zip). Extract the two .prc files from the zip file and install them both to your T3. It is important that you install both files at the same time. If you only install one, you will need to perform a hard reset and try again, so be sure to install both.

[steviehero]

Fantastic, worked like a charm. Thanks again for a flawless product.

Support for the expanded screen of the Tungsten T3 is available in version 4.

Assuming you have version 4, for iSilo to be able to take advantage of the expanded screen of the Tungsten T3, you also need to install the T3 DIA (Dynamic Input Area) Compatibility prcs from Palm. You can download them by clicking here (http://www.iSilo.com/download/dl/T3_DIA_Compatibility_prcs.zip). Extract the two .prc files from the zip file and install them both to your T3. It is important that you install both files at the same time. If you only install one, you will need to perform a hard reset and try again, so be sure to install both.

[shanyin]

I installed T3_DIA_Compatibility_prcs.zip on my Tungsten T5 assuming that T3 and T5 should need similar software configuration.
here (http://www.iSilo.com/download/dl/T3_DIA_Compatibility_prcs.zip).

However, astonishingly I found, after installing two programs in this zip file. I had to do a hard reset. And then, my entire input area is gone. The whole input area and the toolbar at the bottom of the screen turned into a blank area! What should I do? Did I do any harm? Please help!!

Support for the expanded screen of the Tungsten T3 is available in version 4.

Assuming you have version 4, for iSilo to be able to take advantage of the expanded screen of the Tungsten T3, you also need to install the T3 DIA (Dynamic Input Area) Compatibility prcs from Palm. You can download them by clicking here (http://www.iSilo.com/download/dl/T3_DIA_Compatibility_prcs.zip). Extract the two .prc files from the zip file and install them both to your T3. It is important that you install both files at the same time. If you only install one, you will need to perform a hard reset and try again, so be sure to install both.

[iSilo]

If after doing your "hard reset" did not restore your input area, then you probably did not really do a hard reset.

Before you do a hard reset, make sure you have a backup copy of your data, as a hard reset erases all data from your device.